Residential Concrete Installation
in Middle Tennessee
New residential concrete for Tennessee homeowners. Driveways, patios, walkways, garage floors, porch slabs, steps, and stoops. Properly excavated, properly based, properly poured, and finished to last.
Get Your Free EstimateNew Concrete for Your Home
A new concrete project at a Tennessee home is a long-term decision. The driveway you pour this year will see twenty Tennessee summers, twenty Tennessee winters, every freeze cycle, every gully washer, and every load you put on it. Done right, it costs nothing past the initial pour. Done wrong, it cracks, settles, spalls, and eventually has to be ripped out and redone. S and S Excavation and Hauling installs new residential concrete for homeowners across Manchester, Tullahoma, Shelbyville, and the surrounding region, and we treat every residential pour like it has to last.
Residential concrete installation covers a wide range of projects. New driveways for new construction or to replace a deteriorated old slab. Patios and back porches for outdoor living. Walkways from the driveway to the front door. Garage floors. Steps and stoops at front and back entries. Mailbox posts and curb addresses. Pool deck slabs. Each project has its own design considerations, but the underlying principle is the same: prepare the ground properly, pour the right concrete, and finish it the right way.
What separates our residential concrete from a generic concrete contractor is the earthwork that goes underneath it. Most concrete cracks because of what is under the concrete, not because of the concrete itself. Soft spots, organic material left in place, inadequate compaction, missing aggregate base, poor drainage. We come from an excavation background, so we treat the subgrade and base preparation as the project. The pour is the easy part. The dig is what makes it last.
Residential Concrete Projects
New Driveways
Concrete driveways from straight short runs to long curved approaches. We excavate to grade, install and compact aggregate base, set forms to your design, place reinforcement, pour, and finish to a broom-textured surface for traction. Saw-cut control joints are placed at engineered intervals so cracking, when it happens, happens where it is supposed to.
Patios and Back Porches
Outdoor living slabs sized to your furniture and entertainment plan. Standard broom finish for daily wear, or upgraded finishes including stamped patterns, exposed aggregate, or integral color where you want a more finished look. Slope is set away from the house to keep water moving off the slab and away from the foundation.
Walkways and Sidewalks
Concrete walkways from driveway to front door, around the side of the house, or out to a back deck or pool. Standard widths from 36 to 60 inches with proper sub-base, jointing, and slope for drainage. We can match an existing walk or design something new that fits your landscape plan.
Garage Floors and Pads
Garage floor slabs, shop pads, and outbuilding floors poured to the right thickness for your intended use. Standard car storage gets four-inch reinforced concrete; a workshop with a vehicle lift or a tractor inside needs five or six inches with thicker edges. Vapor barrier under the slab keeps moisture from migrating up.
Steps, Stoops, and Porch Pads
Concrete steps to a front or back door, larger landings, and porch pads under existing wood or composite porches. We form the risers and treads to a comfortable rise-and-run, install rebar, pour, and finish. Existing wood steps that have rotted or settled can be replaced with concrete that will not move and will not need to be replaced again.
Pool Decks and Specialty Pads
Pool deck slabs around in-ground pools, generator pads, AC condenser pads, hot tub pads, and storage shed pads. Each gets the right base, the right reinforcement, and the right surface texture for its use. Pool decks especially need a non-slip finish and proper slope away from the pool. Coordinated with your grading and drainage plan.
Our Installation Process
On-Site Estimate
We come to your property, walk the project, measure dimensions, check soil conditions, and review access for trucks and equipment. You get a clear written quote covering excavation, base, forms, reinforcement, concrete, and finish work, the complete job, no surprise add-ons.
Dig and Base
We excavate to the right depth, remove any unsuitable material, install and compact aggregate base in lifts, and verify the base is firm, level, and at the correct elevation. This is where most concrete failures are prevented before the pour ever happens.
Form, Reinforce, Pour
Forms are set to dimension and elevation. Reinforcement (rebar, wire mesh, or fiber where appropriate) is placed. Concrete is delivered, placed, struck off, and finished to the texture you chose, broom finish for traction, smooth steel-trowel for shop floors, or decorative patterns for patios.
Cure, Joint, Cleanup
Curing compound is applied to lock in moisture for proper strength gain. Saw-cut control joints are placed within 12 to 24 hours so cracks form where they should. Forms are stripped, edges are backfilled, and the site is cleaned up. We walk the finished work with you before calling the job done.
Residential Concrete Projects
Why Choose S and S for Residential Concrete
Subgrade Done Right
We come from earthwork. We know exactly what bad subgrade does to a concrete slab over five and ten and twenty years. The base under your driveway gets the same attention as the pour itself, because that is where the real work happens.
One Crew Owns the Job
The crew that excavates is the crew that pours. No handoff between an excavation contractor and a separate concrete contractor. No scheduling gaps, no finger-pointing if something does not turn out right, and no extra coordination work for you.
Tennessee Conditions Built In
Our concrete designs account for the specific challenges of Middle Tennessee, clay soils that swell and shrink with moisture, freeze-thaw cycles in winter, heavy summer rain. Generic specs from coastal or desert climates do not apply here. Our work is designed for here.
Owner-Operated
The person you call about your project is the same person you meet on site. Veteran-owned, ten years in business, and the only crew name on every job. You always know who you are dealing with from the first call through the final walkthrough.
Honest Recommendations
If your project does not really need concrete, we will tell you. Some driveways are better off in gravel. Some patios make more sense in pavers. Our goal is the right solution for what you are trying to do, not the most expensive solution we could sell you.
Fixed-Price Quotes
The quote you sign is the price you pay. Excavation, base, forms, reinforcement, concrete, finishing, and cleanup are all included. If we hit something unexpected on site, we discuss it with you before doing extra work, not after sending you the bill.
Residential Concrete FAQs
What does a new concrete driveway cost?
Driveway cost depends on length, width, thickness, terrain, base preparation, and any extras like a turnaround or extra-wide approach. Straight, flat driveways cost less per square foot than curved or sloped driveways. We provide free on-site estimates that cover the complete job from excavation through finishing. Call (931) 636-7713 to schedule a visit.
How thick should my driveway or patio be?
Standard residential driveways and patios are four inches of concrete over four to six inches of compacted aggregate base. Driveways that will see heavy trucks, RVs, or boats should be five to six inches thick with thickened edges. We assess the actual loads your slab will see and recommend a thickness that matches the use.
How long until I can use the new concrete?
Light foot traffic is usually safe within 24 to 48 hours. Vehicle traffic should wait at least seven days, and ideally the full 28-day cure period for full strength. Heavy loads (trucks, equipment, RVs) should always wait the full 28 days. We provide specific guidance based on the mix design and the weather conditions at the time of your pour.
Will my new concrete crack?
All concrete cracks eventually because concrete shrinks as it cures and moves with seasonal temperature changes. The point of saw-cut control joints is to make sure the cracks happen at the joints, where they are nearly invisible, instead of at random locations across the slab. Properly placed control joints are the single biggest factor in keeping a slab looking new.
Can you pour concrete in winter?
Concrete can be poured in cooler weather using heated water, accelerating admixtures, and insulating blankets. We avoid pouring when temperatures drop below the mid-twenties or when extended freezing is forecast within the first 48 hours. We will tell you honestly if conditions are not right and reschedule rather than place concrete that may not reach design strength.
Should I seal my new concrete?
Sealing extends the life of decorative finishes and helps protect against staining and de-icer damage. We recommend sealing patios, walkways, and decorative driveways after the initial 28-day cure, and resealing every two to three years depending on exposure. Standard broom-finish driveways do not require sealing but benefit from it. We can include sealing in the original quote or recommend a follow-up product.
Ready for a Free Estimate
From new driveways to back patios, garage floors, walkways, and porch slabs, S and S Excavation handles residential concrete installation across Middle Tennessee. Honest quotes. Proper subgrade. Concrete that lasts.