Skip to content
Land Clearing · Winchester, TN

Winchester’s Land Clearing Contractor

Land clearing and forestry mulching on ridge lots, lake-view parcels, pasture, and build sites across Franklin County. Owner on every job, veteran-owned.

The short version

Clearing a Franklin County lot is rarely a one-tool job.

Land clearing around Winchester is rarely a single-tool job, because Franklin County ground does not come in one flavor. A parcel here can be light pasture brush along the bottoms, second-growth cedar and hardwood on the slopes, or full ridge woods with mature oak and rocky pockets that break a blade. The right mix of forestry mulcher, dozer, excavator, and saw crew depends entirely on what is actually on the ground, which is why S & S Excavation & Hauling walks every lot before scoping. Clearing land off a satellite photo is how the plan changes halfway through.

Forestry mulching, which is the service this company started on, is the right call on most Winchester lots that are not full mature timber. A drum mulcher on a tracked carrier grinds brush, vines, and small trees in place into a layer of mulch that becomes erosion control the same day. No burn pile, no haul-off, no leftover stumps to deal with later. On the ridge-and-hollow lots and the lake-view parcels dropping toward Tims Ford, that in-place mulch is doing double duty: it opens the view and it holds the red-clay slope against the next storm.

Lake-view and ridge lots are their own animal and we treat them that way. Opening a view toward Tims Ford Lake is one of the most common reasons a Winchester property owner calls, and it is easy to do badly. Strip a slope bare and the first hard rain runs the topsoil straight into the water and leaves a scar. We mulch selectively on the steeper ground, keep the anchor trees that hold the hillside, and grind the understory that blocks the view, so you end up with a clean, managed lot instead of a washout.

For parcels with real trees we bring the right machine to the size. Smaller stems go through the mulcher, mid-size hardwoods come down with the saw and get processed, and mature oak and cedar get pulled root and all by the excavator and either hauled, milled, or stacked for you. We will tell you honestly on the walk what each tree should become, because on a Franklin County lot some of them are worth more standing at the edge of a lake view than piled in a burn heap.

Franklin County drainage and erosion rules matter on any cleared Winchester parcel, and we know them cold. A lot brought into pasture or cleared for a build has a window where bare soil moves with the next thunderstorm, and the ridge country around Winchester gets hard, concentrated rain. Silt fence, hay-bale checks, or a quick rough grade and seed are part of the scope when the timing calls for it, not an afterthought bolted on after the damage.

Stump grinding versus full extraction is a real decision that changes the plan, and we lay both out. Grinding below grade is faster and works for most landscape, pasture, or pad-and-build scenarios where the stump just has to be below the surface. Full extraction matters when a foundation, driveway, septic line, or utility trench will run through where the stump sat. We give you both options and the honest recommendation, not the more expensive one by default.

Burn permits, debris hauling, and disposal are part of the conversation up front, not buried in a change order. Tennessee burn permits run seasonally through the Division of Forestry, and we pull them when burning is the right call on a Winchester job. When it is not, we mulch in place or haul to an approved transfer site, and the disposal shows on the scope where you can see it. Timing matters too: wet red clay tears up under tracked machines, so we reschedule a Winchester clearing job when the forecast says so rather than rutting the lot and coming back to fix it.

S & S Excavation & Hauling is veteran-owned and owner-operated, and the person who walks your Winchester lot to scope it is the one on the machine when the work happens. We have been clearing Franklin County and Highland Rim lots for over a decade, from small pasture knockdowns to full ridge-woods build sites near Sewanee and along the US-64 corridor. There is no middle-manager layer between what you asked for and what gets done.

How the work happens

The same Winchester workflow every time.

01

On-site walk and scope

We walk the Winchester parcel with you, mark the trees worth keeping, set the boundary and the view line, and scope against what is actually on the ground. No deposit for a written scope.

02

Boundary marking and utility check

Property lines flagged, 811 locate called in. We do not put a mulcher or dozer near unmarked services on a Franklin County lot, ridge or bottom.

03

Mulching and tree removal

Forestry mulcher handles brush and small stems, the saw crew drops the trees you marked, the excavator handles stumps and large root balls. Debris stays on-site as mulch where that works, otherwise it is hauled.

04

Stump treatment

Grinding below grade for landscape and pasture, full extraction where a foundation, driveway, or utility trench will cross. Holes backfilled and rough-graded so the lot is usable.

05

Erosion control and rough grade

Silt fence, hay-bale checks, or a quick rough grade and seed on any lot where bare red clay will sit before the next phase. Near Tims Ford Lake the slope gets protected before we leave.

06

Walkthrough and signoff

We walk the cleared lot with you, confirm the view line and scope are met, hand over the written scope and reconciliation, and clean up before final payment.

Where we work

Clearing across Winchester and Franklin County.

Land Clearing Contractor · Winchester, TN · FAQ

Questions Winchester landowners ask.

What decides the right approach to clearing a Winchester lot?
What is actually on the ground. A Franklin County parcel can be light pasture brush, second-growth cedar and hardwood, or full ridge woods with mature oak and rocky pockets, and the right mix of forestry mulcher, dozer, excavator, and saw crew depends on the walk. S & S Excavation & Hauling walks every lot before scoping, because clearing land off a satellite photo is how the plan changes halfway through.
Is forestry mulching a good fit for lake-view ridge lots near Winchester?
It is one of the best fits there is. A drum mulcher grinds brush, vines, and small trees in place into a mulch layer that works as day-one erosion control, which matters on a slope dropping toward Tims Ford Lake. It opens the view without a burn pile, without haul-off, and without leaving a scarred hillside that washes with the next rain. On steeper ground we mulch selectively to hold the soil.
Do you handle stump grinding or full extraction?
Both. Grinding below grade works for most Winchester landscape and pasture uses where the stump just has to be out of the way. Full extraction is required where a foundation, driveway, septic line, or utility trench will run through the stump location. We give you both options and the honest recommendation, not the more expensive one by default.
Will a cleared Winchester lot need erosion control?
Usually yes, and more so on the ridge-and-hollow ground around Winchester. Bare red-clay soil moves fast with the next Tennessee thunderstorm, and Franklin County disturbed-area rules apply on most parcels. We include silt fence, hay-bale checks, or a quick rough grade and seed in the scope when the timing calls for it, and near Tims Ford Lake that step is not optional.
Do you handle burn permits and debris hauling?
Both. Tennessee burn permits come from the Division of Forestry and we pull them when burning is the right call on a Winchester job. When it is not, debris is mulched in place or hauled to an approved transfer site. Disposal is part of the conversation up front, on the scope, never a surprise change order.
Can you clear a wooded parcel for a build site in Franklin County?
Yes. S & S Excavation & Hauling clears Winchester build sites including stump extraction where the slab and footings will sit, rough grade for the builder takeoff, silt fence per Franklin County stormwater rules, and coordination with the surveyor and GC. Overclearing a lot triggers compliance issues that did not have to exist, so we hold the disturbed area to what the scope needs.
Ready for a real number?

Free land clearing contractor quote.

Call and we will come out, walk the parcel, and write a real scope for your Winchester, TN lot. No deposit, no pressure. See finished work in our gallery or request the quote.