Land Clearing in Murfreesboro, Tennessee
Trees, brush, and stumps gone. Residential lots, rural tracts, and commercial sites cleared the right way the first time. Call the owner directly.
Residential and Commercial Clearing Across Rutherford County
Murfreesboro is one of the fastest-growing cities in Tennessee, and that growth has put clearing crews on lots that have been overgrown for decades. Dense cedar stands, old hardwoods, invasive brush, and unmanaged tree lines are the norm on infill lots and rural parcels alike.
S and S Excavation and Hauling handles land clearing for new home construction, site development, pasture restoration, fence line clearing, and commercial site prep throughout Murfreesboro and Rutherford County. We use the right method for the job: forestry mulching when material can stay on site, full removal when it needs to go, and manual felling for trees too large for the head.
There is no dispatcher between you and the crew. The owner walks the site, writes the price, and runs the machine. That is the same setup on a quarter-acre residential lot in Murfreesboro as it is on a 50-acre development tract in Rutherford County.
What a lot costs to clear here comes down to what is growing on it and what is under it. A cedar-dominant lot clears fast because cedar grinds easy and the root balls are shallow. A stand of mature oak, hickory, or hackberry is slower going, and the big root systems have to be dealt with instead of ground off at grade. Then there is the rock. Parts of Rutherford County have limestone sitting inches under the surface, so a stump that would pop free in deep soil has to be cut and ground in place because there is nowhere for it to lift. We read all of that on the walk. It is why we price after seeing the ground and not off a flat per-acre number that ignores what the lot actually is.
The other question every clearing job has to answer up front is where the material goes. Mulching in place is cheapest and leaves the soil protected, but it leaves a chip layer on the ground, which is fine for pasture and fence line and less ideal if you are pouring a slab next month. Full haul-off gives you a bare, clean lot ready to grade, but you are paying to load, truck, and dump the material. On a lot with a lot of big timber, sometimes the right move is to deck the good logs for the landowner to sell or mill and haul only the slash. We lay those options out with the real cost of each so you pick with the numbers in front of you.
Call (931) 636-7713 or send a message to get a price on your property. We also handle follow-on site prep and grading after the clearing is done.
We Use the Right Tool for the Job
Forestry Mulching
Single-pass clearing that grinds trees, brush, and stumps into on-site mulch. No haul-off. Best for lots where material can stay and you want the ground protected against erosion. More about forestry mulching.
Full Clearing and Haul-Off
Trees felled, brush cleared, stumps ground, and all material removed from the site. Best for construction lots or properties where a clean grade is needed immediately after clearing.
Selective Clearing
Remove specific trees or vegetation while leaving others. Common on lots with mature hardwoods worth preserving, or fence lines that need clearing without taking the whole canopy.
Post-Clearing Grading
Once the lot is cleared, grading shapes the surface for drainage and final use. We handle clearing and grading as a single scope so there are no coordination gaps between crews.
Pasture and Fence-Line Reclaim
Overgrown pasture and grown-up fence lines cleared back to usable ground for the cattle and horse owners around Eagleville and Rutherford. Cedar and briar knocked out, the line reopened, the pasture edge pushed back where it belongs.
Log Decking and Haul
On tracts with marketable timber, we can deck the good logs to the side for you to sell or mill and haul only the slash. It keeps value on your property instead of trucking it to a dump.
Land Clearing in Murfreesboro
What property owners ask before booking. Call or message us directly.
What does land clearing include in Murfreesboro, TN?
Land clearing covers tree removal, brush and undergrowth clearing, stump grinding or mulching, debris hauling or on-site processing, and rough grading when the scope requires it. The method depends on what the cleared land will be used for and whether the material needs to leave the site or can stay as mulch.
How much does land clearing cost in Murfreesboro?
Heavily wooded tracts with large hardwoods cost more per acre than light brush or cedar-dominant lots. S and S Excavation gives prices after a site walk, not from a per-acre rate sheet.
Do you haul material away or leave it on site?
Both options are available. We can mulch material in place with the forestry head, leaving a protective layer on site, or we can chip and haul debris off the property entirely. The choice depends on your project timeline, site conditions, and what you want the cleared lot to look like afterward.
How long does land clearing take in Murfreesboro?
A typical half-acre residential lot takes one to two days depending on tree density and debris handling method. Larger commercial tracts are priced and scheduled by acre. We give a realistic timeline during the site walk.
Is a permit required for land clearing in Rutherford County?
Most residential land clearing in unincorporated Rutherford County does not require a permit. Properties inside Murfreesboro city limits may require approval depending on acreage, slope, and proximity to waterways. We pull permits where required as part of the job scope.
Can you clear land that is sloped or has drainage issues?
Yes. Rutherford County has rolling terrain and clay-heavy soil that affects both the clearing method and what happens to the lot afterward. We factor slope, drainage, and planned use into the scope so the clearing does not create new problems at the edges or downhill.
Do you handle clearing for new home construction?
Yes. Clearing for home construction is one of the most common jobs in the Murfreesboro area. We clear the footprint, remove stumps, and rough-grade the site. If site prep and grading are needed as a follow-on, we handle that too.
What do you do with the stumps and the root balls?
It depends on the method and the soil. With forestry mulching, stumps get ground several inches below grade and left in place, which is fine for most uses. With full clearing where you need a clean building pad, stumps and root balls are pulled and hauled. On Murfreesboro’s shallow limestone, some stumps cannot be pulled because there is rock right under them, so those get ground flush instead. We match the stump method to what the lot is doing next and tell you the plan before we start.
Can you clear a wooded lot without disturbing the trees I want to keep?
Yes. Selective clearing is a big part of what we do around Murfreesboro, where a lot of buyers want the homesite opened up but the mature hardwoods along the edges left standing. We flag the keepers with you at the walk, then clear the understory and the marked trees while working the machine around the canopy you are saving. Cedar and junk brush come out, the shade trees stay, and the lot ends up usable without looking scalped.
Get a Price on Your Murfreesboro Property
One call, one site walk, one number from the owner. No subcontractors, no dispatchers. Rutherford County and Middle Tennessee land clearing for residential and commercial properties.
Talk To S and S Excavation and Hauling
Reach out today for a fast, no-pressure quote. We look forward to working with you.